Home » Technical

Re-sheeting vs Over cladding

23 September 2010 One Comment

In general, there are two principal categories of building envelope refurbishment: re-sheeting and over cladding.

Re-sheeting requires the existing building envelope to be completely removed and replaced by a new envelope system, whereas with over cladding, the existing building envelope is left in place and is used as a base layer for the installation of the new cladding system.

The choice between the two options will depend on the individual project requirements and circumstances. To assist in this decision, some of the key items for consideration of both systems are listed below: (visual taken from our latest Refurbishment technical paper).

Text only version of the key items for consideration of both re-sheeting and over cladding systems:

RE-SHEETING

Advantages of re-sheeting:

  • Potentially hazardous existing materials can be completely removed.
  • The internal appearance of the building can be improved.
  • There is potential to improve the internal working environment for occupants.
  • It is easy to alter lighting configurations to optimum levels i.e. change pattern of windows and rooflights.
  • Air-tightness and thermal performance levels similar to new buildings can be achieved.
  • The existing structure is nearly always suitable for re-sheeting applications.
  • There is an opportunity to alter the building configuration.

Disadvantages of re-sheeting:

  • The cost of disposal of hazardous waste should be accounted for.
  • The need for internal protection should be accounted for during the installation phase.
  • Additional cost will be involved in re-sheeting.
  • A higher level of disturbance to occupants and operational processes.

OVER CLADDING

Advantages of over cladding:

  • It is usually less expensive to over clad.
  • On site installation is fast.
  • There is minimal disturbance to building occupants.
  • Insulation can be easily upgraded.
  • Air-tightness levels similar to a re-sheet or new build can be achieved if considered at design stage.
  • There is a reduced need for internal protection during installation.

Disadvantages of over cladding:

  • Upgrading of internal appearance and lighting configurations is difficult.
  • Over cladding relies on the integrity of the existing structure.
Related Posts Plugin for WordPress, Blogger...

One Comment »

  • Paul Martin said:

    I have been debating this myself for the past few weeks and I think I have been swayed towards re-cladding. Less expensive and as you say much easier to install. Although re-sheeting gives you more options, the time it takes and the cost of doing it outweigh the benefits for me.

Leave your response!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.